Motorchair for Companions

Device to apply to any manual wheelchair, both folding and fixed.

Characteristics

With battery charge indicator.

With its simple handling, it provides the perfect help when there are slopes or simply to not have to push the wheelchair on any terrain.

It has forward and reverse gear.

By means of a lever located under the grip we can operate the device, regulating its speed and adapting it to our step

With transport bag included to carry everything collected.

With a simple system it can be deactivated, leaving it in the air, and manipulating the chair as if it were without the Motorchair installed (for example for indoor operations).

The fixings are suitable for both 22mm tube and 25mm tube. If the bars where the fixings go are more than 25 cm from the ground, a special coupling is necessary as an accessory.

To fold the chair, the cable that goes to the control is simply disconnected, and the levers of the fixings are activated to release the motor with the crossbar. Once the motor is removed, the chair can be folded without any problem, even if the two fixings remain on the chair. The knob that goes over the grip can be easily removed so it does not get damaged.

The fixings are suitable for both 22mm tube and 25mm tube. If the bars where the fixings go are more than 25 cm from the ground, a special coupling is necessary as an accessory.

To fold the chair simply disconnect the cable that goes to the control, and actuate the levers of the fixings to release the motor with the crossbar. Once the motor has been removed, the chair can be folded without any problem, even though the two fixings remain on the chair. The knob that goes over the grip can be easily removed so it does not get damaged.