Scale for Mover 180 and Air

Scale for Mover 180 and Air

The scale is intended to be used in combination with the Molift Air and Molift Mover 180 cranes.

The Molift scale is Class III approved and meets all technical standards. You can also calculate BMI (Body Mass Index) with a simple tap.

• Complies with all technical regulations.

• This product has been manufactured in accordance with harmonized European standards, in accordance with the provisions of the following directives: Directive 93/42 / EEC on medical devices Directive 90/384 / EEC on non-automatic weighing instruments Directive 73/23 / CEE relative to low voltage

Technical characteristics:

• Measurements: 120 x 50 x 160mm

• The maximum load capacity 300KG.

• To clean the scale, it is recommended to use cloths with alcohol or similar. Do not use large amounts of water, as the electronic components could be damaged, it is also advisable to avoid the use of corrosive liquids and high pressure cleaners.

• The optimum operating temperature for the scale is between 0ºC and + 40ºC. Always disconnect the scales from the power supply before cleaning them.

• It is recommended to use the scale on a flat and hard surface. Soft surfaces, such as carpets, cause the scale to lose precision.